Tracey and Jon Stewart and Farm Animal Rescue

article link: http://talkingpointsmemo.com/livewire/jon-stewart-tracey-farm-sanctuary

I was at an event last Saturday where Tracey and Jon Stewart were being honored for opening up a new sanctuary for rescued farm animals. The new sanctuary will be an extension of the Farm Sanctuary in Watkins Glen, NY.

The video below says far more than I can about the extraordinary work that the Farm Sanctuary and other NY sanctuaries (ie, Woodstock Farm Animal Sanctuary). Warning: the video below shows the horrid conditions that these 200 animals were rescued from.

Big Steamroller Printing Day on Sunday

This past Sunday, October 5, was the day that the steamroller project came to its ultimate conclusion—the printing of the huge woodcut blocks with a steamroller.  It was a beautiful day in Garrison, NY and we had a great turnout. There are some really wonderful (and nicer than seen here) photos of the event on the Garrison Art Center Facebook page and a really nice photo essay on this blog (link).

My plates went first and there were logistics that had to be worked out after mine and another set of plates were printed unevenly. After that, they rotated the direction of plates in relation to the steamroller drum which yielded better results. So, they very generously offered to print my plates again at the end of the session so that my 2nd print would benefit from the kinks having been worked out after the first printings.

Below is a step-by-step photo sequence that explains how the printing was done:

Here are some of the blocks waiting to be printed.

Inking up the plates with a huge roller.

Cutting the vinyl blanket to size before it's put over the underboard.

These are my 3 inked plates (triptych) side-by-side
on top of the vinyl blanket and the underboard.

Laying the proofing paper over the plates.

The top blanket layer goes over the paper.

The top MDF board covers the layers of
blankets, plate and paper.

Sweeping the dust and dirt from the roller drum.

Driving over the boards to print the plate sandwiched
between top and bottom boards, blankets.

Pulling the proof after printing.

Head Trap, Woodcut, 96" x 48" (8' x 4')
The second print had better ink coverage. Some areas were over-inked but overall it was pretty cool having a print this size.

Steamroller Project Work-In-Progress

Initial sketches (in book) and further sketch for the three 32" x 48" panels

I've been working away on the woodcut project for Garrison Art Center's Rolling on the River event. Above you can see the initial sketches that I was working with to create the composition that I am using for reference to carve the images.

I have three 32" x 48" panels which will form a 4' x 8' triptych print. The composition was designed so that each panel could stand alone as well as work in combination with the other panels to form a larger unified image. This was done partially for logistical reasons (fitting the panels in my car as well as easing the ability to hand-print later on—if I wish to—when I won't have a steam roller on hand).

Below, are images of the middle and left panels on the floor with my sketch reference handy to guide me as I carve the image into the wood. The wood that I am using is 1/2" birch plywood.

The bottom pic is of the right panel with ink applied so I could see the image more clearly and add details and refinements with more clarity. I'm still working on this but it gives me an idea of how the other panels will look and where I need to modify my approach as the image comes together.

Sketch reference on top of middle and left panel. Carving in-progress.

Right panel with ink applied so that I can see the image more clearly. Still working on details but the cow image is emerging.